VAL Avionics NAV 2000 Guia de Instalação descarregar pdf (Página 284)

Accessory Installation and Configuration

15-16 SkyView System Installation Guide - Revision R

Video Input Adapter for SkyView (USB)

The Video Input Adapter (P/N 102211-000) allows display of a video source (nominally, a

camera), displayed either 100% of the SkyView display, or 50% of the SkyView display to which

it is connected. The video image on one SkyView display cannot be “shared” to other SkyView

displays. Only one Video Input Adapter can be used per SkyView display.

The Video Input Adapter for SkyView works with:

All SV-D1000T (SkyView Touch) displays (including units upgraded from SV-D1000)

SV-D700 displays S/N 4000 and higher

SV-D1000 displays S/N 6000 and higher

If you have a display with earlier S/N, please contact Dynon Avionics Technical

Support (contact information at the beginning of this manual).

The Video Input Adapter is supported in SkyView firmware v11.0 (and later). It is

not functional in any earlier version of SkyView firmware.

SkyView only supports the Video Input Adapter

available from Dynon Avionics. Although other

similar adapters are available, they will likely not

function with SkyView and are not supported by

Dynon Avionics.

The Video Input Adapter includes various connectors

for multiple input sources, but in SkyView, only the

Composite Video (the middle cable in the illustration

at right – Yellow, single RCA connector) and the S-

Video (the left cable in the illustration at right, 4-pin

mini-DIN) inputs are functional. The Composite

Video and S-Video inputs are compatible with both

NTSC (US analog video standard) and PAL (non-US

analog video standard) video sources.

There is only one video input – you can use either

the Composite input or the S-Video input, but not

both.

Dynon Avionics does not supply cameras or other video sources, or cabling associated with

video devices. The video device will require power that is not supplied or controlled by

SkyView.

Video quality of analog video devices such as cameras that output composite or S-

Video is extremely sensitive to the quality of cable used. It is recommended to use

high quality video cable for the connection between the video source (especially a

camera) and the Video Input Adapter.

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 400 401

Sem comentários

VAL Avionics NAV 2000 Guia de Instalação Página 284